Looks a lot like my wardrobe, even the Chucks. Can’t quite find a cut like that anymore, but I love that wash. And, honestly, I like it when they get tattered by the heel.

Oh, that sounds like a fun project! Going to post it to Lemmy when you’re done? I’m not familiar with proxmox. I see it’s based on Debian, is it basically an os specifically for running vm instances or something?

I like the look of that generation Optiplex. My current main PC is a slightly upgraded XPS 8930, which is IMO one of the ugliest Dell cases. And the airflow has been a terrible challenge. But since it’s not a standard board, I can’t just pop it in a better case. And there’s no way im buying a new mobo for an LGA 1151. So, I’m stuck until I build something new.

June 13th, 2022. 7:13pm. If that’s the last one I burn, I will at least know when. It was Windows XP Media Center 2005, for my fleamarket Dell Demension E510. Well, more accurately, an E310 with a E510 motherboard.

Free sure beats $20k annually, for sure. I can’t imagine sketching without color changing lines. Im confused why the overlapping circles would form a void, rather than two complete cylinders that intersect.

Yeah, constructor/construction lines rock. That’s something relatively new in NX, too. I think with release 1921 or something. Hugely beneficial.

The lack of intersecting geometry is a big hindrance to the way I model things. Pads and pockets are something I haven’t dealt with since probably NX 7.5, back around 2012. I’m not sure if I can change at this point.

For 2D things, I really like to make primary sketch for all my features. Maybe a second sketch for holes and slots. And my 3D models mostly start with customer data, and I extract surfaces from there. I define parting lines with shadow curves, and split my slides out with sheets normal to the target surface. I then extrude surfaces out along a vector to outside the envelope of the tool, trim them, and use a bounded plane to close it up. Sew into a solid body, and it’s a slide. No sketches at all sometimes. But tons of intersecting geometries until the end. Then, adding vacuum, water, air, mounting holes. Seal grooves. Those usually take sketches.

I’m obviously not trying to do my job in FreeCAD, my company uses NX. But I dont think I can easily change my workflow just to do my personal stuff with it, since it is so radically different.

I like your models. It’s nice you have a cohesive design for all your handheld display stands, so they’ll all look good together.

How long did the bunny take in FreeCAD?

What CPU cooler is that? Looks a lot like the one I just stuck in my Dell XPS 8930.

I can’t stand comedy movies like Spy, or Identity Theft. That’s what made me not like her. Exposure to her roles outside of that typecast changed my opinion. Like Only Murders. I also thought she made a very good Ursula.

Chris Pratt, Jack Black. Melissa McCarthy used to be on the list, but not anymore.

Surprisingly, Kevin Spacey isn’t on there. The man is disgusting, but I really like his work.

Joke’s on you, I’ve already had like, 15.

My honeymoon didn’t even cost that much! Man, that is exactly why I don’t go anywhere or do anything.

Nah. It’s fine. I ended up taking an extra year to get my BSME. Nobody has ever once questioned that on my resume. Luckily, a few of my friends continued on to graduate studies, so I still knew a few people that last year.

No! Never! What the hell causes that? Is it a dry skin thing? Looks painful and disturbing.

Ah, ok. I’ve been using NX since it was still Unigraphics, so I am admittedly biased. I haven’t tried any of the newer things like Fusion or Sketchup. Might I ask what industry you use FreeCAD for at a professional level? Just curiosity. I’m automotive interiors tooling, so I’m pretty dependent on strong surfacing tools. Lots of A-surface stuff.

Also, how would you model this up in FreeCAD? This took me about 15 minutes in NX, with one sketch and some offset curves. I was making a 3D printed tag for my daughter.

I tried for over two hours in FreeCAD, but only got this far. I could not extrude individual bodies from one sketch, I had to make separate sketches for each shape. Offset curves didn’t appear to be a thing, and I couldn’t find any form of synchronous modeling tools. So, making those raised outlines was a whole other challenge. I ended up having to extrude a sheet taller than the main body, then thicken it. I couldn’t figure out how to select face edges for use in other commands, either. I ended up giving up.

I never cared about new reddit vs old reddit, because it always looked the same on Baconreader. I couldn’t continue after I lost that. I really wish there was a Lemmy fork of it, it was my favorite.

Connect is pretty good so far, not quite the same.

What were you using BEFORE FreeCAD if it has MORE sketch constraints?? Man, I found it so limiting compared to NX. Especially the sketching. And surfacing appeared to be basically nonexistent. Maybe I’m too spoiled with NX, but I dont think I could function for even a day on FreeCAD. It’s worse than SolidWorks (and I hate SolidWorks). I really, really wanted to like it. I even gave it a second chance when 1.0 dropped.

It’s a comfortable outdoor temperature.

It needs some adjustment. 0 is fine, but 68 should be the new 100. We shouldn’t have to exist in climates warmer than that.

Probably because people above the waterline don’t know Mozilla exists, and people below have seen how things have been going lately.

Location: MI, USA. My city is insanely white. The second highest demographic being Black, at around 4%. I have never seen or heard any celebrating around here. But you can expect a 2hr wait at any Mexican restaurant.